Buy the Audioplex VC200-D Volume Control 200 Watts Max on http://www.inwallstore.com
Print This Page
Print This Page
Brand:
Audioplex
Located in:
Impedance, Regular Types
Finely adjust each room's volume via pop-free twelve step switch technology.Designed for performance, these volume controls offer attenuation of 34 dB with a frequency response of 35Hz to 20kHz.Tri-filar wound volume controls provide an easier load to your amplifier...extending the life of your system. Creatively combining resistive and reactive characteristics into the design, Audioplex's hand wound autoformers incorporate far more turns than any other manufacturer.Audioplex's unique PurePath design makes individual room volume control feasible for high-performance in-wall and box speakers. Audioplex PurePath volume controls can be set to a special step, the PurePath Step. This volume control position guarantees that the attenuator is completely bypassed in parallel, delivering all of the available amplifier power via direct connection with the speaker...for ultimate in audio fidelity. You can match PurePath volume controls to any speaker with confidence.Because Purepath volume controls are solely used for adjustment, you gain far more flexibility to select exactly what volume level you want to listen to. Additionally, PurePath controls offer the Ultimate Off step. When you turn Audioplex volume controls to the lowest step, no sound escapes from your speakers. Unlike some others, Audioplex believes off is off.Overall mounting depth 2 3/8"---These will fit in standard J-box depths.
[1 of 1 customers found this review helpful]
Seems to work
By Rick
from Arizona on 2/21/2010
from Arizona on 2/21/2010
Pros:
Easy To Use
Cons:
Hard Install
Describe Yourself:
Enthusiast
Primary use:
Personal
Bottom Line:
Yes, I would recommend this to a friend
Comments about Audioplex Audioplex VC200-D Volume Control 200 Watts Max:
Seems to work ok. The install on the other hand was a pain. This control was not made to be used with 14guage strained speaker wire. There is no way to get all the strands in the terminal. Be prepared to make a trip to [...] for some liquid tape to make sure the strands don't short to the next terminal.
Inwallstore.com Response: All the connectors on all the volume controls and speaker selectors are the same in regards to using 14 gauge wire...that's the top end of the hole opening and takes patience to insert correctly. Only strip back about 1/8 to 3/16 of jacket and don't twist the wire going in.
The review on THIS being a hard install isn't a fair review of THIS product. All these types of connectors offer the same design.
The review on THIS being a hard install isn't a fair review of THIS product. All these types of connectors offer the same design.